Catalytic reforming of olive mill wastewater and methane in a Pd-membrane reactor

Silvano Tosti, Massimiliano Fabbricino, Ludovico Pontoni, Vincenzo Palma, Concetta Ruocco

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Olive mill wastewater (OMW) is a biomass by-product of the olive oil industry. To treat this waste, reforming has been studied as a means of both producing hydrogen/syngas and reducing the pollution resulting from OMW. This study investigated a process in which OMW was added to methane and fed into a membrane reformer. The goal was to use the large water excess in OMW for reforming the methane. The results of the experiment showed that the combined reforming of methane and OMW is characterized by high hydrogen yields, with all the organic matter (the total organic carbon of both the OMW and the methane) reacting to produce hydrogen. Particularly, at 450 °C and 500 kPa with a space velocity of 0.17 mol h-1gCAT-1 and a steam-to-carbon ratio of 16.6, hydrogen yields around 45 g per 100 g of TOC fed were measured. This corresponds to the production of 12.3 kg of ultra-pure hydrogen per ton of treated OMW. Also, it was demonstrated that adding methane to OMW does not affect the ability of the reforming process to reduce the pollution from the wastewater. Finally, the optimum operating conditions of the membrane reformer were defined by analyzing the effect of the space velocity and steam-to-carbon ratio on hydrogen production.
Original languageEnglish
Pages (from-to)5465 - 5474
Number of pages10
JournalInternational Journal of Hydrogen Energy
Volume41
Issue number12
DOIs
Publication statusPublished - 6 Apr 2016
Externally publishedYes

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Fuel Technology
  • Condensed Matter Physics
  • Energy Engineering and Power Technology

Cite this