Development of 2D and 3D Hi-Nicalon fibres/SiC matrix composites manufactured by a combined CVI-PIP route

C.A. Nannetti, B. Riccardi, A. Ortona, A. La Barbera, E. Scafè, G. Vekinis

Research output: Contribution to journalArticle

39 Citations (Scopus)

Abstract

SiCf/SiC composites with true 3D textures were manufactured in order to investigate the effects of the texture on thermal and mechanical properties. Hi-NicalonTMfibre preforms having a total fibre volume content of about 40% with 25 and 50% relative fibre content through the thickness were infiltrated using a mixed chemical vapour infiltration-polymer infiltration and pyrolysis technique. The issues and the main characteristics of the obtained 3D composites are presented and compared with the ones of 2D composites prepared employing the same materials and process. © 2002 Elsevier Science B.V. All rights reserved.
Original languageEnglish
Pages (from-to)1196 - 1199
Number of pages4
JournalJournal of Nuclear Materials
Volume307-311
Issue number2 SUPPL.
DOIs
Publication statusPublished - Dec 2002
Externally publishedYes

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Nuclear and High Energy Physics
  • Materials Science(all)
  • Nuclear Energy and Engineering

Cite this

Nannetti, C. A., Riccardi, B., Ortona, A., La Barbera, A., Scafè, E., & Vekinis, G. (2002). Development of 2D and 3D Hi-Nicalon fibres/SiC matrix composites manufactured by a combined CVI-PIP route. Journal of Nuclear Materials, 307-311(2 SUPPL.), 1196 - 1199. https://doi.org/10.1016/S0022-3115(02)00956-X