Electrophoretic deposition of lignin reinforced polymer coatings

M. Federica De Riccardis, Daniela Carbone, Daniela Cuna

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Abstract

Composite coatings based on PEEK and Lignin were obtained by EPD. The addition of Lignin had some beneficial effects, the most relevant being an increased coating adhesion on conductive substrates. Before using in EPD suspensions, Lignin was functionalised by a carbonyl group. This functionalisation produced chemical interactions between PEEK powder and Lignin, and, as a consequence, better results in terms of both EPD efficiency and adhesion coating. Moreover, the addition of Lignin increased the hydrophobicity of PEEK coatings when they were thermally treated at temperature lower than the melting point of PEEK.
Original languageEnglish
DOIs
Publication statusPublished - 2015
Externally publishedYes
Event5th International Conference on Electrophoretic Deposition: Fundamentals and Applications, EPD 2014 - Hernstein, Austria
Duration: 1 Jan 2015 → …

Conference

Conference5th International Conference on Electrophoretic Deposition: Fundamentals and Applications, EPD 2014
CountryAustria
CityHernstein
Period1/1/15 → …

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

De Riccardis, M. F., Carbone, D., & Cuna, D. (2015). Electrophoretic deposition of lignin reinforced polymer coatings. Paper presented at 5th International Conference on Electrophoretic Deposition: Fundamentals and Applications, EPD 2014, Hernstein, Austria. https://doi.org/10.4028/www.scientific.net/KEM.654.247