Fabrication and testing of trasco RFQ

E. Fagotti, M. Comunian, A. Palmieri, A. Pisent, C. Roncolato, F. Grespan, S.J. Mathot

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Abstract

The Legnaro National Laboratory (LNL) is building the 30 mA, 5 MeV front end injector for the production of intense neutron fluxes for interdisciplinary application. This injector comprises a proton source, a low energy beam transport line (LEBT), a radio frequency quadrupole (RFQ) and a beam transport line designed to provide a 150 kW beam to the beryllium target used as neutron converter. The RFQ, developed within TRASCO project for ADS application, is designed to operate cw at 352.2 MHz. The structure is made of OFE copper and is fully brazed. The RFQ is built in 6 modules, each approximately 1.2 meter long. This paper covers the mechanical fabrication, the brazing results and acceptance tests for the various modules.
Original languageEnglish
Publication statusPublished - 2009
Externally publishedYes
Event24th International Linear Accelerator Conference, LINAC 2008 - , Canada
Duration: 1 Jan 2009 → …

Conference

Conference24th International Linear Accelerator Conference, LINAC 2008
CountryCanada
Period1/1/09 → …

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Atomic and Molecular Physics, and Optics

Cite this

Fagotti, E., Comunian, M., Palmieri, A., Pisent, A., Roncolato, C., Grespan, F., & Mathot, S. J. (2009). Fabrication and testing of trasco RFQ. Paper presented at 24th International Linear Accelerator Conference, LINAC 2008, Canada.