Fabrication of the wing and vertical target dummy armour prototypes of the ITER divertor

M. Grattarola, M. Bet, B. Biagiotti, G. Gandini, M. Merola, G.B. Ottonello, B. Riccardi, G. Vieider, F. Zacchia

Research output: Contribution to journalArticle

Abstract

The dummy armour prototypes are identical to the reference components in terms of geometry, cooling circuit and material except for the armour material, which is replaced by an equivalent thickness of copper alloy. The main objectives of the dummy armour prototypes are the demonstration of the overall engineering concept of the Divertor, the integration in a 3° cassette together with components manufactured by the other ITER Home Teams and the successive thermo-hydraulic tests on the whole Divertor module. This paper describes the realization of both the wing and the vertical target dummy armour prototypes focusing on the critical aspects of the fabrication and their impact on a further industrialization of the components.
Original languageEnglish
Pages (from-to)201 - 206
Number of pages6
JournalFusion Engineering and Design
Volume49-50
DOIs
Publication statusPublished - 2000
Externally publishedYes

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Mechanical Engineering

Cite this

Grattarola, M., Bet, M., Biagiotti, B., Gandini, G., Merola, M., Ottonello, G. B., ... Zacchia, F. (2000). Fabrication of the wing and vertical target dummy armour prototypes of the ITER divertor. Fusion Engineering and Design, 49-50, 201 - 206. https://doi.org/10.1016/S0920-3796(00)00345-8