Manufacture and Preliminary Tests of a 12 T “Wind and React” Coil

Maurizio Spadoni, Antonio della Corte, Giorgio Pasotti, Nicola Sacchetti, Alessandro Bonito Oliva, Roberto Penco, Nico Valle, Werner Specking

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

As already reported ENEA is engaged in the realization of a 12 T wind and react Nb3Sn coil, a subsize magnet designed to simulate many technological problems to be faced in NET-ITER magnets. EM-LMI and Ansaldo are the industrial partners in this project. A preliminary winding has been built and successfully tested. This winding has been cut in pieces and carefully inspected to be sure that the impregnation process after the heat treatment works well. No particular flaws have been detected. Then manufacturing of the 12 T magnet has been started and completed in about three months. Heat treatment, impregnation and electrical tests at 300 K have been successfully performed and the magnet is now ready for final tests. In order to obtain the most significant scientific and technological informations from this magnet, the original test programme (insertion of the coil in the SULTAN facility) has been modified according to a decision of the Fusion Technology Steering Committee (FTSC) of EURATOM. Details of the new test programme are given in the paper. © 1994 IEEE
Original languageEnglish
Pages (from-to)2146 - 2149
Number of pages4
JournalIEEE Transactions on Magnetics
Volume30
Issue number4
DOIs
Publication statusPublished - 1994
Externally publishedYes

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Cite this

Spadoni, M., Corte, A. D., Pasotti, G., Sacchetti, N., Oliva, A. B., Penco, R., ... Specking, W. (1994). Manufacture and Preliminary Tests of a 12 T “Wind and React” Coil. IEEE Transactions on Magnetics, 30(4), 2146 - 2149. https://doi.org/10.1109/20.305695