Overview on the IFMIF test cell development

V. Heinzel, P. Bem, E. Esposito, S. Gordeev, U. Fischer, A. Moeslang, S. Simakov, A. Shimizu, M. Sugimoto, I. Tiseanu, P. Vladimirov, Y. Watanabe, T. Yutani

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

The major components of the test cell are the three test modules, the shield plugs and the test cell covers. The existing drawings of the IFMIF test cell and the internals were put together to have a common basis for discussion. The high-flux-test-module was redesigned. The rigs were designed with a flat plate geometry. They are equipped with an electric heater system, with which the temperatures in the specimens stack can be kept at temperature levels between 250 and 650 °C within a tolerance of 30 °C. The temperature level of each rig can be adjusted independently. First result of the optimization of the medium-flux-test-module are also described. © 2004 Elsevier B.V. All rights reserved.
Original languageEnglish
Pages (from-to)223 - 227
Number of pages5
JournalJournal of Nuclear Materials
Volume329-333
Issue number1-3 PART A
DOIs
Publication statusPublished - 1 Aug 2004
Externally publishedYes

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Nuclear and High Energy Physics
  • Materials Science(all)
  • Nuclear Energy and Engineering

Cite this

Heinzel, V., Bem, P., Esposito, E., Gordeev, S., Fischer, U., Moeslang, A., ... Yutani, T. (2004). Overview on the IFMIF test cell development. Journal of Nuclear Materials, 329-333(1-3 PART A), 223 - 227. https://doi.org/10.1016/j.jnucmat.2004.04.341