Thermo-mechanical tests of a CFC divertor mock-up

A. Cardella, M. Akiba, R. Duwe, E. Di Pietro, S. Suzuki, K. Satoh, N. Reheis

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Thermo-mechanical tests have been performed on a divertor mock-up consisting of a metallic tube armoured with five carbon fibre composite tiles. The tube is inserted inside the tiles and brazed with TiCuSil braze (monoblock concept). The tube material is TZM, a molybdenum alloy, and the armour material is SEP CARB N112, a high conductivity carbon-carbon composite. Using special surface preparation consisting of laser drilling, small (∼- 500 μm) holes in the composite have been made to increase the surface wetted by the braze and the resistance. The mock-up has been tested at the JAERI 400 kW electron beam test facility JEBIS. The aim of the test was to assess the performance of the mock-up in screening and thermal fatigue tests with particular attention to the behaviour of the armour to heat sink joint. © 1994.
Original languageEnglish
Pages (from-to)117 - 121
Number of pages5
JournalJournal of Nuclear Materials
Volume209
Issue number2
DOIs
Publication statusPublished - 1994
Externally publishedYes

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials

Cite this

Cardella, A., Akiba, M., Duwe, R., Di Pietro, E., Suzuki, S., Satoh, K., & Reheis, N. (1994). Thermo-mechanical tests of a CFC divertor mock-up. Journal of Nuclear Materials, 209(2), 117 - 121. https://doi.org/10.1016/0022-3115(94)90285-2