Ti

M. Utili, M. Agostini, G. Coccoluto, E. Lorenzini

Research output: Contribution to conferencePaper

Abstract

One of the main issues regarding the design of LFR is the corrosion-erosion behaviour of materials in contact with high temperature and high velocity lead, such as pump impeller and bearing materials. Those materials will worked in Lead at about 480°C with a velocity relative to impeller blade in the magnitude of 10m/s. Ti3SiC2, a ternary compound was selected as one of the most promising candidate material, the most significant aspect of Ti3SiC2is that it combines some of the most attractive proprieties of ceramics with those of metals. This material was already applied in industry but more effort is needed to qualify its performance when compared with candidate structural stainless steel available in Europe. With the purpose of evaluating the corrosion resistance of Ti3SiC2, a preliminary screening test was carried out at ENEA Brasimone in fluent lead under oxidation conditions (oxygen concentration of about 10-6wt% in the melt), with an average temperature of 500°C and a stream velocity of about 1 m/s. Copyright © 2009 by ASME.
Original languageEnglish
Publication statusPublished - 2009
Externally publishedYes
Event17th International Conference on Nuclear Engineering, ICONE17 - , Belgium
Duration: 1 Jan 2009 → …

Conference

Conference17th International Conference on Nuclear Engineering, ICONE17
CountryBelgium
Period1/1/09 → …

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Nuclear Energy and Engineering

Cite this

Utili, M., Agostini, M., Coccoluto, G., & Lorenzini, E. (2009). Ti. Paper presented at 17th International Conference on Nuclear Engineering, ICONE17, Belgium.