Ti cladding and Ni alloying on pure aluminium and aluminium alloys by an electron beam technique

S. Tosto, P. Vanhille, C. Vignaud

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

Alloying and cladding treatments have been performed on pure aluminium and a 5%Si-3% Cu-Mg A1-based alloy by an electron beam technique. Metal sheets of Ti-6A1-4V alloy and pure nickel were used for cladding and alloying respectively. In both cases the sheets were mechanically clamped on the substrate. In the cladding process, a thin layer of substrate only a few tens of microns thick was affected by the melting process. In the alloying process, melting and solidification of the Ni overlayer with a controlled amount of substrate lead to a significant modification of the surface microstructure and microhardness. © 1993.
Original languageEnglish
Pages (from-to)137 - 142
Number of pages6
JournalSurface and Coatings Technology
Volume58
Issue number2
DOIs
Publication statusPublished - 3 Aug 1993
Externally publishedYes

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this